产品分类

联系我们

ADD: 深圳宝安中心区宝源路F518时尚创意园15栋3层 TEL: 400-846-9998 FOX：+86-769-8103 9998 MAIL：dysft@dysft.com

产品名称：

MC442 Nema17/23 digital driver

Your location： Home → Product → Stepper Driver Series > 2 Phase digital stepper driver

Product Name： MC442 Nema17/23 digital driver

上市日期：2017-03-19

产品型号：

MC442 digital low-voltage stepper motor driver, using the latest 32-bit DSP technology, suitable for driving 42,57 series motor, with excellent low-speed performance. Can be customized according to user needs within 512 subdivided and rated current within any current value, due to the internal increase in the motor parameters automatically identify the function, can be used for different motors with the corresponding operating parameters, the motor running very smoothly, the noise small.

订购热线： 86-755-6113 1663

SKYPE客服

旺旺客服

新浪微博

分享到豆瓣

在线订购

Technical Information
Dimensions
Product Image
Wiring Method
Package Product
Application Areas
Download

Driver Function	operation Insulation
Microsteps Sudivision setting	SW5-SW8 four DIP switches to set the drive micro-step subdivision, a total of 15 steps of mic ro-step breakdown. When the user sets the subdivision, the drive should be stopped first. For details on the numberof microsteps,Please according to the drive panel.
Working current setting	SW1-SW3 three DIP switches to set the drive output current, the output current of a totalof 8 floor.Details on setting the output current,refer to the description of the driver panel.
Automatic half current Function	SW4 can be used to set the automatic semi-flow function of the drive. OFF mean the quiescent current is set to half of the dynamic current, and ON means the quiescent current is the same as the dynamic current SW4 should be set to OFF for general use, resulting in reduced heat generation in the motor an the drive, resulting in improved reliability. Approximately 0.3 seconds after the pulse train is stopped, the current automatically reduced by 50% (55% of the actual value) and the calorific value is oretically reduced by 65%.
Signal interface	PUL + and PUL- are the positive and negative terminals of the control pulsesignal;DIR + and DIR- are the positive and negative terminalsof the directional signal;ENA + and ENA- are the positive & negative terminals of the enable signal.
Motor interface	A + and A- are connected to the positive and negative terminals of the A-phase winding of the stepping motor; B + and B- are connected to the positive and negative terminals of the B-phase winding of the stepping motor.When A, B two-phase winding exchange,direction of the motor can be reversed
Indicator light	The driver has two red and green lights. The green light is the power indicator, the green light is on when the driver is powered on. The red light is the fault indicator. When the overvoltage or overcurrent fault occurs, the fault light is on.Fault clear, the red light off. When the drive fails, the fault can only be cleared by re-powering up and re-enabling it.
Power supply Port	DC power supply, the input voltage range: 18V-36VDC,Power more than 100W
Installation Notes	Driver dimension :116x69x26mm ,installation the hole spacing of 109mm can be horizontal can be horizontal or vertical mounting （suggest the vertical installation) when installed ,mke it close to the metal cabinet to facllitate heat .

MC442 driver with eight DIP switch set subdivision accuracy, dynamic current and half-flow / full-flow, described in detail as follows:

MC442 Nema17/23 digital driver

Working current setting :

Peak current	Mean current	SW1	SW2	SW3
1.00A	0.71A	on	on	on
1.46A	1.04A	off	on	on
1.91A	1.36A	on	off	on
2.37A	1.69A	off	off	on
2.84A	2.03A	on	on	off
3.31A	2.36A	off	on	off
3.76A	2.69A	on	off	off
4.20A	3.00A	off	off	off

Microstep settings :

Step/turn	SW5	SW6	SW7	SW8
400	off	on	on	on
800	on	0ff	on	on
1600	off	off	on	on
3200	on	on	off	on
6400	off	on	off	on
12800	on	off	off	on
25600	0ff	off	off	on
1000	on	on	on	off
2000	off	on	on	off
4000	on	off	on	off
5000	off	off	on	off
8000	on	on	off	off
10000	off	on	off	off
20000	on	off	off	off
25000	off	off	off	off

MC442 Nema17/23 digital driver

产品相关产品 / Products 更多>>

42 Nema17 hybrid motor

2017 - 05 - 19

Electrical SpecificationsMotor modelstep/angleLengthHolding torqueCurrentResistane Inductance Rotor inertiaLead wire Weight°mmN.MAΩMHg.cm2NO.KgLC42HS281.8280.121.20.81.03040....

57 Nema23 hybrid motor

2017 - 05 - 19

Electrical Specifications Model ItemStep/anglelength Holdig torqueCurrentResistanceInductance Rotor inertiaLead wireWeight°mmN.MAΩMHg...

Suitable for all kinds of motion control equipment and instruments, such as: electronic processing and testing,semiconductor packaging, laser cutting and welding, laser phototypesetting, packaging machinery, engraving machines, marking machines, cutting machines, clothing plotter, CNC machine tools, automation Assembly equipment. Low noise, high-speed performance and cost-effective competition, the field of choice.

/Private/ProductFiles/06359181ed9f3a0d3408.pdf

Current product download——> Click to Download

Recommended Products / 热卖产品 More

LCDA357H 3 Phase Nema23 closed-loop driver

2017 - 03 - 20

Features: 1. Voltage input range: 18V ~ 50VDC2. Maximum peak current: 7A3. Subdivision range: 200 ~ 51200ppr4. Signal input: differential / single-ended, pulse / direction5. Impulse response limit frequency: 200KHZ6. Power-on parameter auto-tuning function7. Closed-loop vector control to ensure that the motor high-speed high-torque output, while ensuring that the motor does not lose step8. Wi...

MC542 Nema23 digital driver

2017 - 03 - 19

Driver Functionoperation InsulationMicrosteps Sudivision settingSW5-SW8 four DIP switches to set the drive micro-step subdivision, a total of 15 steps of mic ro-step breakdown. When the user sets the subdivision, the drive should be stopped first. For details on the numberof microsteps,Please according to the drive panel. Working current settingSW1-SW3 three DIP switc...

LCDA2260H 3 Phase Nema42 driver

2017 - 03 - 20

Features: 1. Voltage input range: 150 ~ 230VAC2. Quiescent current and dynamic current can be set at 0 ~ 6A3. Closed-loop vector control to ensure that the motor high-speed high-torque output, while ensuring the motor does not lose step4. Built-in sub-sub-low-speed low-level operation can also be very smooth5. Parameter automatic setting function6. Current dynamic control greatly reduces the ...

A4 Series AC 220V Servo driver

2019 - 03 - 22

A4 Servo driver standard specificationstandard specificationInput powerMain loop power single/3 phase : 200-240VAC 50/60HzControl loop powersingle phase :220-240VAC 50/60HzWorking condition TemperatureWorking temperature: 0-55 ° C Storage temperature -20 ° C -60 ° C HumidityWork / save ≤ 90% RH or less (no condensation)Altitude ≤1000mVibration≤5.88M/S...

联系我们

MC442 Nema17/23 digital driver

QQ设置

SKYPE 设置

阿里旺旺设置

电话号码管理

二维码管理