Welcome to Shenzhen Xinli Chuan Electric Co., Ltd.

Shenzhen Xinli Chuan Electric Co., Ltd.
产品分类

联系我们

公司地址
ADD: 深圳宝安中心区宝源路F518时尚创意园15栋3层 TEL: 400-846-9998 FOX:+86-769-8103 9998 MAIL:dysft@dysft.com
产品名称:

MC860H Nema34 digital driver

Product Name: MC860H Nema34 digital driver
上市日期:2017-05-17
产品型号:

 MC860H on the main drive 86.110 two-phase hybrid stepping motor, the micro-step scores of 16, the maximum number of steps 51200 Pulse / rev; its peak current range of 2.4A ~ 7.2A, the output current of 8 files, current Of the resolution of about 0.6A, with automatic half-flow, overvoltage, overcurrent protection and other functions. The drive for the AC and DC power supply, the operating voltage range of AC: 18V ~ 80V DC: 24V ~ 90V

 

订购热线: 86-755-6113 1663
SKYPE客服
旺旺客服
新浪微博
分享到豆瓣
  • Technical Information
  • Dimensions
  • Product Image
  • Wiring Method
  • Package Product
  • Application Areas
  • Download

 


 

Driver Function

operation Insulation

Microsteps Sudivision setting

SW5-SW8 four DIP switches to set the drive micro-step subdivision, a total of 15 steps of mic ro-step breakdown. When the user sets the subdivision, the drive should be stopped first. For details on the numberof microsteps,Please according to the drive panel.

 Working current setting

SW1-SW3 three DIP switches to set the drive output current, the output current of a total of 8 floor.Details on setting the output current,refer to the description of the driver panel.

Automatic half current Function

SW4 can be used to set the automatic semi-flow function of the drive. OFF mean the quiescent current is set to half of the dynamic current, and ON means the quiescent current is the same as the dynamic current SW4 should be set to OFF for general use, resulting in reduced heat generation in the motor an the drive, resulting in improved reliability. Approximately 0.4 seconds after the pulse train is stopped, the current automatically reduced by 50% (60% of the actual value) and the calorific value is oretically reduced by 36%.

    Signal interface

PUL + and PUL- are the positive and negative terminals of the control pulsesignal;DIR + and DIR- are the positive and negative terminalsof the directional signal;ENA + and ENA- are the positive & negative terminals of the enable signal.

 Motor interface

A + and A- are connected to the positive and negative terminals of the A-phase winding of the stepping motor; B + and B- are connected to the positive and negative terminals of the B-phase winding of the stepping motor.When A, B two-phase winding exchange,direction of the motor can be reversed

      Indicator light

The driver has two red and green lights. The green light is the power indicator, the green light is on when the driver is powered on. The red light is the fault indicator. When the overvoltage or overcurrent fault occurs, the fault light is on.Fault clear, the red light off. When the drive fails, the fault can only be cleared by re-powering up and re-enabling it.

    Power supply Port

AC power supply, the input voltage range: 36V-70VAC,Power more than 300W

  Installation Notes

Driver dimension :151x97x48 mm ,installation the hole spacing of 143 mm can be

horizontal can be horizontal or vertical mounting (suggest the vertical installation) when installed ,mke it close to the metal cabinet to facllitate heat .

 

 

MC860H driver with eight DIP switch set subdivision accuracy, dynamic current and half-flow / full-flow, described in detail as follows:

 

MC860H Nema34 digital driver

 

Working current setting :

 

Mean currentPeak current

SW1

SW2

SW3

2.00A

2.40A

on

on

on

2.57A

3.08A

off

on

on

3.14A

3.77A

on

off

on

3.71A

4.45A

off

off

on

4.28A

5.14A

on

on

off

4.86A

5.83A

off

on

off

5.43A

6.52A

on

off

off

6.00A

7.20A

off

off

off

 

Microstep settings :

 

Step/turn

SW5

SW6

SW7

SW8

400

on

on

on

on

800

off

on

on

on

1600

on

off

on

on

3200

off

off

on

on

6400

on

on

off

on

12800

off

on

off

on

25600

on

off

off

on

51200

off

off

off

on

1000

on

on

on

off

2000

off

on

on

off

4000

on

off

on

off

5000

off

off

on

off

8000

on

on

off

off

10000

off

on

off

off

20000

on

off

off

off

40000

off

off

off

off

  

 

 MC860H Nema34 digital driver

MC860H Nema34 digital driver

MC860H Nema34 digital driver

MC860H Nema34 digital driver

 

 MC860H Nema34 digital driver

产品相关产品 / Products 更多>>
2017 - 05 - 19
Electrical Specifications Motor modelStep/angle LengthHolding torqueCurrent Resistance InductanceRotor inertiaLead wireWeight°mmN.MAΩMHg.cm2NO.KgLC86HS68011.8663.33.00.61.6100...

Suitable for all kinds of motion control equipment and instruments, such as: electronic processing and testing,semiconductor packaging, laser cutting and welding, laser phototypesetting, packaging machinery, engraving machines, marking machines, cutting machines, clothing plotter, CNC machine tools, automation Assembly equipment. Low noise, high-speed performance and cost-effective competition, the field of choice.

Current product download——> Click to Download
Recommended Products / 热卖产品 More
2017 - 03 - 20
Features: 1. Voltage input range: 18V ~ 50VDC2. Maximum peak current: 7A3. Subdivision range: 200 ~ 51200ppr4. Signal input: differential / single-ended, pulse / direction5. Impulse response limit frequency: 200KHZ6. Power-on parameter auto-tuning function7. Closed-loop vector control to ensure that the motor high-speed high-torque output, while ensuring that the motor does not lose step8. Wi...
2017 - 03 - 19
Driver Functionoperation InsulationMicrosteps Sudivision settingSW5-SW8 four DIP switches to set the drive micro-step subdivision, a total of 15 steps of mic ro-step breakdown. When the user sets the subdivision, the drive should be stopped first. For details on the numberof microsteps,Please according to the drive panel. Working current settingSW1-SW3 three DIP switc...
2017 - 03 - 20
Features: 1. Voltage input range: 150 ~ 230VAC2. Quiescent current and dynamic current can be set at 0 ~ 6A3. Closed-loop vector control to ensure that the motor high-speed high-torque output, while ensuring the motor does not lose step4. Built-in sub-sub-low-speed low-level operation can also be very smooth5. Parameter automatic setting function6. Current dynamic control greatly reduces the ...
2017 - 05 - 26
Servo driver B2 name rules    B2 Servo driver standard specification   LCDB2 series   02 04 05 07 08 10 12 13 15 18 20 23 26 28    Power Phase/Voltage  Single-phase 220VAC Single/three phase 220VAC Allowed voltage regulatiion   ...
友情链接
  • 友情链接
  • Mobile Website
    Mobile Website
    WeChat Public No.
    WeChat Public No.
Pre/after-sale service:
Mrs. Rony :8613434774365
Mrs. Jessie:8618565608262
Copyright ©2017  Shenzhen Xinli Chuan Electric Co., Ltd.   ICP09063742-1
犀牛云提供云计算服务